What Are Metal Wall Panels?

Wall Panels
Wall Panels

Metal has always been regarded as a strong and sturdy option for building materials or elements like skylight panels. So it should come as no surprise that metal wall panels are an interesting architectural choice. The use of metal in construction can be dated all the way back to the 1700s. Although it wasn’t until the mid-19th century before the use of metal gained popularity, metal is still widely used to this very day. Considered one of the most important innovations in architecture, this article will discuss all about metal wall panels.


Before going about the different types of metal wall panels and their features, it’s worthwhile to go over why metal wall panels are a strong contender for your architectural consideration. Here are some benefits that metal wall panels provide.

1. Low Maintenance

Metal is a particularly strong and sturdy material which is why using it for construction such as walls would mean they require pretty low maintenance. Metal wall panels can easily last 20-30 years with minimal to no maintenance.

Even if you happen to live in an area with harsh weather and environmental conditions, maintenance is very low. At the very least, maintenance would include: periodic visual inspection to make sure they’re still alright and occasional washing to remove debris that could become nuclei for damage.

2. Easy Installation

Constructing buildings and homes are normally considered to be highly expensive. But aside from the material cost, labor also tends to add up when the construction period takes a long time. In this way, contractors can save a lot of money when builders work with materials that are easy to install.

Compared to traditional wall materials and methods such as brick laying and cement, metal wall panels are quick and easy to install as they conventionally come premade. All the workers have to do would properly install them and a wall is complete.

3. Sustainable

It may not be on the top of everyone’s list but sustainability is becoming more and more important as the planet’s resources are running out. Thankfully, metal wall panels are extremely sustainable as metal the metal components used can easily be recycled and reused for other purposes.

Another benefit of working with sustainable materials is that you end up with less construction waste at the end of a project. Excess metal wall panels can still be stored and easily repurposed somewhere else.

4. Creative Freedom

As mentioned, metal is incredibly strong and sturdy. However, metal is also easy to work with. This means that working with metal provides a wide array of creative freedom. Most flat wall options can only be designed through paint and coatings.

However, metal can be worked so that it does not have to stay in the 2D realm. Bringing out the malleability of metal can create beautiful metal wall panels with interesting textures and designs.

Types of Metal Wall Panels

Now that you are familiar with the benefits of having metal wall panels, it is time to learn the different types of metal wall panels. These are metal wall panels that are characterized by their design and function.

1. Single-Skin Metal Panels

Also referred to as pre-formed or roll-formed panels, single-skin metal panels are simply single interlocking layers of prefinished or natural metal that has been roll-formed or pre-formed into the desired profile.

Due to their design, these metal wall panels are extremely lightweight and easy to install. However, they are not the strongest types of metal wall panels simply because of the fact that they are single layered.

2. Insulated Metal Panels

Compared to single-skin metal panels, insulated metal panels are made of three layers: an insulated foam layer in between two sheets of metal panels. Since metal is characteristically conductive, insulated metal panels are the ideal choice for buildings and homes that are built with climate-control facilities.

The insulation helps keep the harsh environmental cold or warmth outside out, while keeping the preferred temperature inside.

3. Perforated Metal Panels

Metal can look quite industrial and monotonous when used traditionally. However, this does not mean creative life cannot be imbued into metal panels. Creative architects and designers make use of metal wall panels adorned with perforated facades to great effect.

Not only do these metal panels look beautiful with perforated designs, but perforated metal panels can act as a semipermeable membrane that works wonderfully between two areas that share climate conditions.

4. Metal Composite Material Metal Panels

Essentially used in North American construction for the past 40 years, metal composite material metal panels are wall panels that are made by joining two thick metal plates to a core that is made of polyethylene or another fire-retardant plastic material.

These materials are then bonded under a specific temperature, pressure, and tension. Due to the interaction of the different materials used, metal composite material metal panels are extremely sturdy and often used to protect the exterior of buildings from the elements.


Metal wall panels provide a number of benefits that should be greatly considered when deciding wall options. Everyone knows that metal is incredibly strong and having metal wall panels will help affect the perception of the building in the long run.

Buildings and homes with metal wall panels exude the aura of strength and industrialism. If the benefits of having metal wall panels are enough for you to consider them, also note that there are different types of metal wall panels to choose from. Different types of wall panels have different characteristics and provide additional benefits from one another.

Read more on Forbes Magazine


Please enter your comment!
Please enter your name here