• Linkedin
  • Reddit

Summary :

iPhone won’t turn on

iPhone won’t turn on is not a rare issue. If you are also bothered by it, do you know how to solve it? In this article, we introduce 6 effective solutions that are worth trying. When it comes to iPhone data recovery issue, MiniTool Software can help you.

Quick Navigation :

Are You Bothered iPhone Won’t Turn On?

If you are an iPhone user, have you ever encountered the iPhone won’t turn on issue? The phenomenon of this issue is not single. The followings are some typical representatives:

  • Your iPhone screen is stuck or frozen.
  • Your iPhone doesn’t respond when you touch it.
  • Your iPhone becomes stuck when you turn it on.
  • Your iPhone won’t charge when it is out of power.
  • Your iPhone turned off and won’t turn back on.
  • Your iPhone won’t turn on stuck on Apple logo.
  • Your iPhone won’t turn on past the Apple logo.

If you are facing one of the above issues, you can confirm that you run into a problem of iPhone won’t turn on or charge.

Then, is it possible to get rid of this issue? If the situation is not bad enough, you can take some measures to make your iPhone back to the normal state.

In this article, we summarize some fixes that are proved to be effective to solve iPhone won’t turn on issue. You can try them one by one to help you out.

Fix 1: Force Restart Your iPhone

To force restart your iPhone is the easiest way to fix the iPhone won’t turn on issue. Even your iPhone screen is black or its buttons are not responding, you are allowed to force restart an iPhone.

Note: You don’t have to worry about the files on the device because a force restart will not delete them eventually.

Different devices have different methods to perform a force restart. You can follow these steps:

If you are using iPhone 8 or later:

Press and quickly release the Volume Up button and the Volume Down button in succession. After that, press and hold the Side button until you see the Apple logo.

If you are using iPhone 7 and iPhone 7 Plus:

Press and hold the Side or Top button and the Volume Down button for at least 10 seconds until you see the Apple logo.

If you are using iPhone 6s or earlier:

Press and hold both the Side or Top button and the Home button for at least 10 seconds until you see the Apple logo.

If your iPhone still won’t turn on after trying a force restart, use the second solution to have a try.

Fix 2: Reset Proximity Sensor

If there is a malfunction in the proximity sensor that dims the device’s screen when you hold your iPhone up to your face, then iPhone won’t turn on. This is a rare case, but it doesn’t mean that it will not happen.

Now, follow these steps to try it out:

  1. Perform a force restart as mentioned in the above solution.
  2. When the iPhone reboots, its screen should work. Then, go to Settings > General > Reset.
  3. Select Reset All Settings to erase all your preferences and settings on the device without deleting your files.

If you are unable to execute this solution, please skip to the next one.

Fix 3: Charge Your iPhone

Plug in your iPhone via a Lightning cable and let it charge for up to one hour.

If the charging screen is not showing up within an hour, or you just see the “connect to power” screen, you need to check the jack, USB cable, and power adapter. Guarantee that everything is firmly plugged in, free of debris, and undamaged. Sometimes, you need to try another USB cable or power adapter.

If finally, you discover that iPhone won’t charge, it means that you can’t fix this issue using this way. Try the next method, please.

Click to tweet

Fix 4: Update iOS via iTunes

If your iPhone won’t turn on stuck on Apple logo or a red or blue screen, you can try to update iOS using iTunes. Here, you need a computer with the iTunes application installed.

Note: This method will not destroy the data on your iPhone.

Then, follow these steps to do the work:

1. Connect your iPhone to the computer and then open iTunes.

2. Enter the Recovery Mode screen.

If you are using iPhone 8 or later:

Press and hold the Side button & one of the volume buttons for some seconds until you see the power-off slider. Drag the slider to turn off your iPhone. Next, connect the device to your PC while holding the Side button and keep holding until seeing the Recovery Mode screen.

If you are using iPhone 7 and iPhone 7 Plus:

Press and hold the Side or Top button until you see the power-off slider. Drag the slider to turn off the device. After that, connect your iPhone to your PC while holding the Volume Down button until you see the Recovery Mode screen.

If you are using iPhone 6s or earlier:

Press and hold the Side or Top button until you see the power-off slider. Drag the slider to turn off your iPhone. Then, connect the device to your PC while holding the Home button until you see the Recovery Mode screen.

3. You will see a window that gives you the option to restore or update. Then you need to press the Update button to let iTunes reinstall iOS without erasing data on the device.

If the update process takes more than 15 minutes, your iPhone will exit Recovery Mode. Let the download finish and then you need to repeat step 2 and step 3.

iphone stuck in recovery mode thumbnail
iPhone Stuck in Recovery Mode? MiniTool Can Recover Your Data

iPhone stuck in recovery mode? Please use the free iPhone data recovery software - MiniTool Mobile Recovery for iOS to recover its data after fixing your device.

Read More

However, if this way can’t solve the iPhone won’t turn on or charge issue, the next one may work.

Fix 5: Rescue iPhone Data and Restore the Device to Factory Reset

Restoring your iPhone to factory settings can fix a lot of issues on the device. You can try this way to get rid of the iPhone won’t turn on issue.

However, this way will delete all files on your device. If you have backed up the data on the device recently, everything will be OK. You can just skip to step 2 to factory reset your iPhone to make the device go back to its normal state and then restore your iPhone from the previous backup file.

extract photos from iphone backup thumbnail
Easily Extract Photos from iPhone Backup with These Ways

extract photos from iPhone backup, iPhone backup photo extractor, extract photos from iTunes backup, extract photos from iCloud

Read More

If there is no available iPhone backup file, you’d better first rescue data from your iPhone that won’t turn on using a third-party iPhone data recovery software.

Step 1: Rescue Your Data from iPhone That Won’t Turn On

This free iPhone data recovery software, MiniTool Mobile Recovery for iOS, can help you restore your iPhone data. This software has three recovery modes, and the Recover from iOS Device can rescue files from your iPhone directly.

With the Free Edition of this software, you can retrieve some certain types of files without paying any cent. Press the following button to get this software.

Free Download

Additionally, you need to use this software on a computer that has been trusted by your iPhone before. Then follow these steps to recover your iPhone data:

1. Connect your iPhone with your computer and then open the software.

2. This software will automatically display the device on the interface. Then, click the Start button to start the scanning process.

click Scan

3. When the scanning ends, you will see the scan results. On the left side of the interface, you will see a data types’ list. You can choose each data type and find the files you want to restore.

For example, if you want to recover photos from your iPhone, you can choose Photos from the left list to find your needed items.

choose the needed files from scan results

4. If you discover this software can find the files you want to rescue and you want to use it to recover your iPhone data without limits, you can update it to a full edition. Then, you can check your desired files, press Recover, and then select a suitable location on your computer to save them.

Click to tweet

Step 2: Restore Your iPhone to Factory Settings

  1. You still need to enter the Recovery Mode to factory reset your iPhone. Repeat steps 1 and 2 mentioned in fix 4 to do such a job.
  2. Press the Restore button.
  3. After the restoring process ends, you need to follow the guides on your iPhone to set the device.

If unfortunately this method still can’t solve the iPhone won’t turn on issue, you will need to put the device into DFU mode to restore it to factory settings.

recover iphone data after restoring to factory settings thumbnail
3 Ways to Recover iPhone Data after Restoring to Factory Settings

Recovering iPhone data after restoring to factory settings to your iPhone or computer can be achieved by these three methods which are listed in this article.

Read More

Fix 6: Put iPhone into DFU Mode to Restore It

Some of you reflect that “my iPhone won’t turn on past the Apple logo” or “my iPhone won’t turn on stuck on Apple logo” after jailbreaking or trying to update iOS without enough battery life. To help you get out of these troubles, restoring iPhone to factory settings in DFU mode is an available choice.

Here is a detailed guide:

1. Open iTunes on your computer.

2. Enter the DFU mode:

If you are using iPhone 8 or later:

Quickly press and release the Volume Up button and Volume Down button successively. Then, hold the Side button until the device screen is black. Next, hold the Side and Volume Down buttons at the same time for 10 seconds. Then, release the Side button but continue to hold the Volume Down button for 5 seconds.

If you are using iPhone 7 and iPhone 7 Plus:

Press and hold the Side or Top and Volume Down buttons at the same time for about 10 seconds. Release the Side or Top button but continue to press the Volume Down button for 5 seconds.

If you are using iPhone 6s or earlier:

Press and hold the Side or Top and Home buttons at the same time for about 10 seconds. Release the Side or Top button but continue to press the Home button for 5 seconds.

3. If the screen stays black and nothing appears, you're in DFU Mode. At the same time, you will see that there is a popup window from your iTunes saying iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes.

Then, you need to press OK to close the window. Next, you need to press Restore iPhone and follow the wizard to restore your iPhone to factory reset.

When the restoring process completes, you can reboot your iPhone to see whether the issue disappears.

What Do You Do If Your iPhone Won’t Turn on at All?

Some of you may say: I dropped my iPhone and it won’t turn on. After trying all the above solutions, it still can’t work. What’s next?

In this situation, your iPhone should be seriously damaged. The last choice for fixing iPhone won’t turn on is asking professionals for help. You can contact Apple Support to set up service. If they can’t fix your iPhone, perhaps it’s time to replace it with a new one.

Bottom Line

Your iPhone won’t turn on? Take it easy! We summarize 6 available solutions in this post. You can try them one by one to help you out.

Should you have any questions when dealing with this issue, you can contact us via [email protected] or let us know in the comment.

  • Linkedin
  • Reddit

User Comments :